S.N.	Authors	Title	Source Title	Document Type	Institute Author	Pub Type	DOI	School
1	Roy, A. [et al]	Scalable piezoelectric energy harvesting from PVDF-HFP/BZT-BCT/GO hybrid composite film	Applied Physics Letters	Journals article	Roy, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
2	Katari, V.[et al.]	A Confluence of Emerging Technologies Like IoT, Edge & Cloud Computing, Blockchain, Industry 4.0 & 5.0, AI & ML toward the Realization of Eco-Friendly Supercapacitors	ACS Symposium Series	Book Chapter	Katari, V., Goyal, S., Nigam, V., Sahu, K.K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
3	Saran, D. [et al.]	Novel perspectives on the mechanism of phosphate conversion coating on magnesium alloys	Results in Surfaces and Interfaces	Journals article	Saran, D., Pathak, A.D., Bathula, S., Sahu, K.K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
4	Kumar, A., Das, K., Roy, A.	Improving the energy density and flexibility of PMN-0.3PT based piezoelectric generator by composite designing	Sensors and Actuators A: Physical	Journals article	Kumar, A., Roy, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
5	Swarnakar, P. [et al.]	Understanding the phase stability in a multi-principal-component AlCuFeMn alloy	Journal of Physics D: Applied Physics	Journals article	Swarnakar, P., De, P.S., Roy, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
6	Sethy S.P. [et al.]	Effect of inhibitor addition on the corrosion behavior of a grain boundary relaxed electrodeposited nanocrystalline Ni–P alloy	Journal of Materials Science	Journals article	Sethy S.P., Das P., Varshney P., Gollapudi S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
7	Mandal, Santanu [et al.]	Effects of the multiscale porosity of decellularized platelet-rich fibrin-loaded zinc-doped magnesium phosphate scaffolds in bone regeneration	Journal of Materials Chemistry B	Journals article	Mandal, Santanu	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
8	Pati, Soobhankar [et al.]	A Review of the Solid-State Reduction Aspects of Ilmenite for Efficient and Sustainable Production of TiO2 Slag	Mineral Processing and Extractive Metallurgy Review	Journals article	Pati, Soobhankar and De, P. S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
9	Ojha, A., R., Anirudh, Bathula, S.	Augmentation in the thermoelectric performance by integrating the natural minerals with synthetic tetrahedrite compounds	Materials Science in Semiconductor Processing	Journals article	Ojha, A., R., Anirudh, Bathula, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
10	Roy, Amritendu [et al.]	Castor-oil derived polyurethane/barium titanate piezoelectric smart composite coatings for energy harvesting applications: Prediction and experimental characterization of electro-elastic properties	Polymer Composites	Journals article	Roy, Amritendu and Kumar, Abhishek	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
11	Vijay, Maddikera [et al.]	SIFVT: A Semantically Inclined Framework for Financial Video Tagging	Proceedings of ICWITE 2024: 2nd IEEE International Conference for Women in Innovation, Technology and Entrepreneurship	Conference Proceeding	Vijay, Maddikera	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
12	Deo, Brahma [et al.]	Fundamental Aspects of Dissolution of Lime into Steelmaking Slags	Transactions of the Indian Institute of Metals	Journals article	Deo, Brahma	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
13	Sabat, Rama Krushna [et al.]	The Role of Molybdenum on Room Temperature Tensile Behavior of Recrystallized Fe30Mn5Al1CxMo Lightweight Austenitic Steels	Transactions of the Indian Institute of Metals	Journals article	Sabat, Rama Krushna	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
14	Sethi, Akshaya Kumar [et al.]	Software-based simulations of the creep recovery model of polymer composites	Dynamic Mechanical and Creep-Recovery Behavior of Polymer-Based Composites: Mechanical and Mathematical Modeling	Book Chapter	Sethi, Akshaya Kumar	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
15	Ghosh, S. [et al.]	Heat, Mass, Momentum and Charge Transport	Treatise on Process Metallurgy: Volume 1: Process Fundamentals	Book Chapter	Ghosh, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
16	Mandal, S. [et al.]	Unraveling the effects of nano-grained microstructure on mechanical behavior, corrosion, and in vitro biocompatibility of 316L austenitic stainless steel	Materials Chemistry and Physics	Journals article	Mandal, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
17	Mandal, A. [et al.]	Processing, Microstructure Evolution, and Heat Treatment Response of AA2024 and Its Metal Matrix Composites of In Situ TiB2 Dispersoids	Journal of Materials Engineering and Performance	Journals article	Mandal, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
18	Acharya, M., Mandal, A.	Microstructure Study of Friction Stir Processed Hypereutectic Al-20Si Alloy and Analysis of the Wear Behaviour using Machine Learning Algorithms	Silicon	Journals article	Acharya, M., Mandal, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
19	Mandal, A. [et al.]	Microstructure of Gravity-Cast and Suction-Cast Aluminium-Cerium-Based Alloys	TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS	Journals article	Mandal, A., Gope, R., Nanda, S., Mondol, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
20	Gope, R., Mandal, A., Ganguly, S.	Enhanced impression creep performance of gravity and suction cast Al-12Ce alloy with Si and Mg additions	Materials Today Communications	Journals article	Gope, R., Mandal, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
21	Gope, R. [et al.]	Investigating the load and temperature-dependent dry sliding wear performance of Al–12Ce alloys with Si and Mg additions	Wear	Journals article	Gope, R., Mandal, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
22	Dora, T.R.K.[et al.]	Loss of functional and structural fatigue performance in Nitinol due to laser shock peening	Materials Characterization	Journals article	Dora, T.R.K., Suman, R	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
23	Sahoo, M.K., Mandal, A.	Design and Analysis of Three-Dimensional Foams: A Review	Archives of Computational Methods in Engineering	Journals article	Sahoo, M.K., Mandal, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
24	Kumar, Abhishek [et al.]	Modulating Energy Harvesting Behavior of PVDF Piezo-Polymer by Incorporation of BCZT Ceramic Filler	ACS Applied Electronic Materials	Journals article	Kumar, Abhishek	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
25	Samantaray, B.K. [et al.]	Evaluating the Suitability of Glass Optical Fiber as a Toughening Agent in Silicon Composites Developed by Spark Plasma Sintering	Silicon	Journals article	Samantaray, B.K. and Gollapudi, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
26	Panda, D.[et al.]	Hierarchical Porous Cu with Trimodal Porosity Produced Through Investment Casting and Dealloying	JOM	Journals article	Panda, D., Yara, R., Nath, S.S., Mandal, A., Mangipudi, K.R.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
27	Ojha, A., Sabat, R.K., Bathula, S.	Low lattice thermal conductivity of novel NiVSn with 19 valence electron count contrasted to 18 of NiVAl and NiAlSb Half-Heusler compounds	Journal of Physics and Chemistry of Solids	Journals article	Ojha, A., Sabat, R.K., Bathula, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
28	Sahu, K.K. [et al.]	Safe and stable Li-CO2 battery with metal-organic framework derived cathode composite and solid electrolyte	Journal of Power Sources	Journals article	Sharma, H., Sahu, K.K., Pathak, A.D.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
29	Chavan, A., Mandal, S., Roy, M.	Synergistic effects of Cr addition on surface characteristics and its implications on wear and in vitro biocompatibility of TiMoNbTaW alloys	Intermetallics	Journals article	Mandal, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
30	Bathula, Sivaiah [et al.]	Exploration of synthesis route and effect of Ni-doping on thermoelectric performance of CoSb3	Journal of Physics and Chemistry of Solids	Journals article	Bathula, Sivaiah	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
31	Roy, A.[et al.]	Investigation of 2D-Ti3C2TX-Loaded PVDF Composites for a High-Performance Flexible Piezoelectric Energy Harvester and Wearable Sensor	ACS Applied Electronic Materials	Journals article	Roy, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
32	Sharma, H. [et al.]	Computational materials discovery and development for Li and non-Li advanced battery chemistries	Journal of Electrochemical Science and Engineering	Journals article	Sharma, H., Kekarjawlekar, P., Chatterjee, K., Acharya, S., Sahu, K.K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
33	Sradhasagar, S. [et al.]	Machine learning-aided discovery of bismuth-based transition metal oxide double perovskites for solar cell applications	Solar Energy	Journals article	Sradhasagar, S., Subhasish Khuntia, O., Biswal, S., Purohit, S., Roy, A.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
34	Kushwaha, R. [et al.]	Effect of solute concentration on microstructure evolution during static recrystallization in Mg-0.2%Ce alloy using cellular automata	Materials Today Communications	Journals article	Kushwaha, R. and Sabat, R. K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
35	Ojha,A. [et al.]	Effect of Aliovalent Doping on the Thermoelectric Performance of Double Half-Heusler Alloys	Journal of Electronic Materials	Journals article	Ojha,A., Sabat,R. K., Bathula, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
36	Ojha,A., Sabat,R. K., Bathula, S.	Recent trends of ternary, quaternary half-Heusler thermoelectric materials and contact resistance effect power output efficiency	Materials Letters	Journals article	Ojha,A., Sabat,R. K., Bathula, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
37	Ojha,A., Sabat,R. K., Bathula, S.	Advancement in half-Heusler thermoelectric materials and strategies to enhance the thermoelectric performance	Materials Science in Semiconductor Processing	Journals article	Ojha,A., Sabat,R. K., Bathula, S.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
38	Ojha, Abhigyan; Sabat, Ramakrushna & Bathula, Sivaiah	Thermoelectric and mechanical performance of NiTiAl Heusler compound	Vacuum	Journals article	Ojha, Abhigyan; Sabat, Ramakrushna & Bathula, Sivaiah	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
39	Sabat, R.K. [et al.]	Integrated experimental and modeling approach for hot deformation behavior of Co-Cr-Fe-Ni-V high entropy alloy	Journal of Materials Research and Technology	Journals article	 Sabat, R.K.Â	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
40	Chatterjee, K. [et al.]	Application of Ionic Liquids in Rechargeable Li-Ion Batteries: A Comprehensive Guide to Design, Synthesis and Computational Aspects	Industrial Applications of Ionic Liquids	Conference Proceeding	Chatterjee, K., Sridhar, M. K., Singh, A. K. & Sahu, K. K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
41	Chatterjee, K. [et al.]	Hydrogen storage in metal powder	Metal Powder Report	Journals article	Chatterjee, K., Mohanty, S., Prakash, C., Kumar, A., Saran, D., Bathula, S., Basak, S. & Sahu, K. K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
42	Panda, D. & Mangipudi, K. R.	The role of network topology on the uniaxial tensile behaviour of low density random open cellular structures	Materialia	Journals article	Panda, D. & Mangipudi, K. R.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
43	Deo, Brahma [et al.]	Online Failure Detection during Coal Injection by Wavelet Analysis of Pressure Signal	Manufacturing Technologies and Production Systems: Principles and Practices	Book Chapter	Kaushal, P., Patel, P., Kumar, T.M.,Deo, Brahma	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
44	Vijay, M., Deepak, G., Santhanavijayan, A.	FSOL: Financial Document Recommendation Using Hybridized Semantics Oriented Learning	Communications in Computer and Information Science (2nd International Conference on Electronic Governance with Emerging Technologies, EGETC 2023)	Conference Proceeding	Vijay, M.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
45	Anand, Amit [et al.]	Low temperature hydrothermal processing to recover aluminum from nepheline syenite roast-leach residue	Separation Science and Technology (Philadelphia)	Journals article	Anand, Amit	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
46	Verma M. [et al.]	Effect of concurrent thermal grooving and grain growth on morphological and topological evolution of a polycrystalline thin film: Insights from a 3D phase-field study	Acta Materialia	Journals article	Verma M.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
47	Mandal, Animesh [et al.]	Preface	Lecture Notes in Mechanical Engineering (2nd International Conference on Advances in Materials and Manufacturing Technology, ICAMMT 2022)	Other	Mandal, Animesh	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
48	Pati, Soobhankar [et al.]	Numerical simulation of cold-sprayed hydroxyapatite coating on 316L stainless steel	Finite Elements in Analysis and Design	Journals article	Pati, Soobhankar	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
49	Dash, Madhusmita [et al.]	Engineered stimuli-responsive smart grafts for bone regeneration	Current Opinion in Biomedical Engineering	Journals article	Dash, Madhusmita	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
50	Mohanty, S. ]et al.]	Advanced Surface Engineering Approaches for Exotic Applications	International Journal of Precision Engineering and Manufacturing	Journals article	Mohanty, S., Saran, D., Chatterjee, K., Kumar, A., Prakash, C., Sahu, K. K.	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
51	Gope, Rahul [et al.]	Enhanced corrosion performance of ultrasonically shot peened and graphene nanoparticles reinforced squeeze-cast AZ91 magnesium alloy	Journal of Alloys and Compounds	Journals article	Gope, Rahul	International	View Publication	School of Minerals, Metallurgical & Materials Engineering
52	Gope, R.[et al.]	Microstructure and mechanical properties of suction-cast aluminium–cerium alloys	Materials Science and Technology (United Kingdom)	Journals article	Gope, R., Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
53	Priyanga, G.S., Santosh, S., Mattur, M.N.	Structural and mechanical properties of NiTiAg shape memory alloys: ab-initio study	Modelling and Simulation in Materials Science and Engineering	Journals article	Mattur, M.N.		View Publication	School of Minerals, Metallurgical & Materials Engineering
54	Roy, A. [et al.]	Effective electromechanical properties and energy harvesting response in PMN-0.3PT/PDMS flexible piezoelectric composites: a combined experimental and theoretical study	Journal of Physics D: Applied Physics	Journals article	Kumar, A., Mishra, N., Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
55	Sabat, R.K.[et al.]	The role of molybdenum on evolution of deformation texture in the cold rolled Fe30Mn5Al1C-xMo lightweight austenitic steels	Vacuum	Journals article	Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
56	Pati, S.[et al.]	An Analysis of the Influence of Drying Methods on the Drying Kinetics and Quality of Ilmenite-Coke Composite Pellets	Transactions of the Indian Institute of Metals	Journals article	Nayak, D., Pati, S., De, P.		View Publication	School of Minerals, Metallurgical & Materials Engineering
57	Mandal A.[et al.]	Smart manufacturing technologies in industry 4.0: Challenges and opportunities	Intelligent Manufacturing Management Systems: Operational Applications of Evolutionary Digital Technologies in Mechanical and Industrial Engineering	Book Chapter	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
58	Acharya, T., Pathak, A.D., Pati, S.	High-Temperature Electrochemical Performance of Lithium Titanate (Li4Ti5O12) Anode Material in Secondary Lithium-ion Batteries	Journal of Energy Storage	Journals article	Acharya, T., Pathak, A.D., Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
59	Parida, H., Kundin, J., Alves, C.L.M.	Study of the peritectic phase transformation kinetics with elastic effect in the Fe–C system by quantitative phase-field modeling	Computational Materials Science	Journals article	Parida, H.		View Publication	School of Minerals, Metallurgical & Materials Engineering
60	Kumar, A., De, P.S., Roy, A.	Revisiting lead magnesium niobate-lead titanate piezoceramics for low-frequency mechanical vibration-based energy harvesting	Journal of Alloys and Compounds	Journals article	Kumar, A., De, P.S., Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
61	Sradhasagar, S.[et al.]	Role of Fe3+ doping vis-à-vis secondary phases on the electrical transport of LiTi2(PO4)3 solid electrolyte	Materials Today Communications	Journals article	Sradhasagar, S., A., Pati, S., Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
62	SDVSS Varma, S., Mangipudi, K.R., Budarapu, P.R.	A coupled quantum-molecular mechanics approach for performance analysis of defective Silicon based photovoltaic solar cells	Physica Scripta	Journals article	Mangipudi, K.R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
63	Gollapudi S.[et al.]	Mechanism of precipitation distribution in WE43 alloy	Materials Characterization	Journals article	Kushwaha, Rajan,Choudhari V., Gollapudi S., Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
64	Sabat R.K.[et al.]	Role of crystallographic orientation on the deformation behaviour of Ti-6Al-4V alloy during low cycle fatigue	Philosophical Magazine	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
65	Mishra, N., Das, K.	A finite element study of interphase properties and reinforcement size effect on the electro-elastic properties of PMN-0.3PT/PDMS nanocomposite	Materials Today Communications	Journals article	Mishra, Neelam		View Publication	School of Minerals, Metallurgical & Materials Engineering
66	Dash, Madhusmita[et al.]	Science-based strategies of antibacterial coatings with bactericidal properties for biomedical and healthcare settings	Current Opinion in Biomedical Engineering	Journals article	Dash, Madhusmita		View Publication	School of Minerals, Metallurgical & Materials Engineering
67	Monikandan, V.V., Mandal, A.	Application of the Statistical Method to Analyze the High-Temperature Tribological Properties of Aluminum Composites	Transactions of the Indian Institute of Metals	Journals article	Monikandan, V.V., Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
68	Samantaray, BK [et al.]	Compaction and Pressureless Sintering Characteristics of Silicon and a Silicon Composite Containing a Multicomponent Molybdenum Alloy Reinforcement	Silicon	Journals article	Samantaray, BK., Kumar, U., Bartarya, G., Gollapudi, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
69	Roy, Ritik., Pasayat, Ajit Kumar., Bhowmick, Bhaskar	Factors Responsible for the Success of a Start-up: A Meta-Analytic Approach	IEEE Transactions on Engineering Management	Journals article	Roy, Ritik		View Publication	School of Minerals, Metallurgical & Materials Engineering
70	Manna, AK [et.al]	Influence of ion implantation on depth dependent phase transition in TiO2 films, anatase nanostructures and photo-absorption behavior	Current Applied Physics	Journals article	Manna, AK		View Publication	School of Minerals, Metallurgical & Materials Engineering
71	Sethy S.P. [et.al]	On the Corrosion Behavior of Selective Laser-Melted Ti-6Al-4V Alloys: Role of Mesostructures, Crystallographic Texture, and Phase Fractions	Transactions of the Indian Institute of Metals	Journals article	Sethy S.P., Gollapudi S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
72	Sahoo, Diptikanta [et.al]	Effect of Substrate Heating on Corrosion Behavior of Nickel Coated on AISI 1020 Steel by Cold Gas Dynamic Spraying	Journal of Materials Engineering and Performance	Journals article	Sahoo, Diptikanta., Pati, Soobhankar		View Publication	School of Minerals, Metallurgical & Materials Engineering
73	Samantaray B.K. [et.al]	Boron Deteriorates the Thermal Stability of Nanostructured Silicon	Silicon	Journals article	Samantaray B.K., Bartarya G., Gollapudi S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
74	Sabat R.K. [et.al]	Microstructure, Texture, and Mechanical Properties of Ti6Al4V Alloy during Uniaxial Tension at Elevated Temperatures	Journal of Materials Engineering and Performance	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
75	Tamiridi, Rajesh Dora. [et.al]	Contrasting Effects of Laser Shock Peening on Austenite and Martensite Phase Distribution and Hardness of Nitinol	Crystals	Journals article	Tamiridi, Rajesh Dora., Goud, Rajendra., Gollapudi, Srikant		View Publication	School of Minerals, Metallurgical & Materials Engineering
76	Panda, D [et.al]	Uniaxial Compression Behavior of Open Cellular Materials with Spinodal Morphologies Fabricated by Additive Manufacturing	Transactions Of The Indian Institute Of Metals	Journals article	Panda, D., Mohanty, I., Mandal, A., Mangipudi, KR		View Publication	School of Minerals, Metallurgical & Materials Engineering
77	Pandey, Ashwani;Patnaik, Sarthak;Pati, Soobhankar	Available technologies for remanufacturing, repurposing, and recycling lithium-ion batteries: an introduction	Nano Technology for Battery Recycling, Remanufacturing, and Reusing	Book Chapter	Pandey, Ashwani;Patnaik, Sarthak;Pati, Soobhankar		View Publication	School of Minerals, Metallurgical & Materials Engineering
78	Mattur, Manoj N. [et.al]	Prediction of nature of band gap of perovskite oxides (ABO3) using a machine learning approach	Journal of Materiomics	Journals article	Mattur, Manoj N.		View Publication	School of Minerals, Metallurgical & Materials Engineering
79	Mohanty S. [et.al]	Microstructure and Mechanical Properties of High-Carbon-Containing Fe-Ni-Mn-Al-Cr High-Entropy Alloy: Effect of Thermomechanical Treatment	Frontiers in Materials	Journals article	Mohanty S., Kothari A., Dhindaw B.K., Sahu K.K., Gollapudi S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
80	Roy, A[et.al]	Room-temperature surface multiferroicity in Y2NiMnO6 nanorods	Physical Review B	Journals article	Roy, A		View Publication	School of Minerals, Metallurgical & Materials Engineering
81	Kushwaha R. [et.al]	Microstructure and texture evolution during grain growth of AM30 magnesium alloy	Philosophical Magazine	Journals article	Kushwaha R.,Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
82	Sradhasagar, Siddharth.,Pati, Soobhankar.,Roy, Amritendu	Methods and Techniques of Solid-State Batteries	ACS Symposium Series	Book Chapter	Sradhasagar, Siddharth.,Pati, Soobhankar.,Roy, Amritendu		View Publication	School of Minerals, Metallurgical & Materials Engineering
83	Mandal A. [et.al]	Enhancement of high temperature strength of Al-Cu alloys by minor alloying and hot working proces	Journal of Alloys and Compounds	Journals article	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
84	Kishore, R [et.al]	Visual Machine Learning: Insight Through Eigenvectors, CHLADNI Patterns, And Community Detection in 2D Particulate Structures	International Journal for Multiscale Computational Engineering	Journals article	Kishore, R., Swayamjyoti, S., Das, S ., Gogineni, AK., Sahu, KK		View Publication	School of Minerals, Metallurgical & Materials Engineering
85	Acharya, T., Auromun, K., Choudhary, RNP	Octahedral distortion-driven phase transition, relaxation and conduction process of Zr/Sn modified barium titanate relaxors	Ceramics International	Journals article	Acharya, T		View Publication	School of Minerals, Metallurgical & Materials Engineering
86	Pati, S., Kumar, K., Singh, V.	Development of a process to produce manganese nanomaterials from low grade ferruginous manganese ores	Mineral Processing and Extractive Metallurgy	Journals article	Pati, S., Kumar, K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
87	Meesa, M., Gupta, K., Mangipudi, K. R.	A molecular dynamics study of the influence of nucleation conditions on the phase selection in Fe50Mn30Cr10Co10 high entropy alloy	Materialia	Journals article	Meesa, M., Gupta, K., Mangipudi, K. R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
88	Sahu, K. K. [et.al.]	Artificial Intelligence and Machine Learning: New Age Tools for Augmenting Plastic Materials Designing, Processing, and Manufacturing	Reference Module in Materials Science and Materials Engineering	Book Chapter	Sahu, K. K., Meher, S., Menon, A. M., Sridhar, M. K., Harsha Vardhan, G. V., Pandey, S., Kumar, A., & Das, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
89	Chaitanya, P [et.al]	Technical Note: Hardness, Corrosion Behavior, and Microstructural Characteristics of a Selective Laser Melted 17-4 PH Steel	Corrosion	Journals article	Chaitanya, P., Goud, R ., Gollapudi, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
90	Saran, Debasis [et.al]	Review on the phosphate-based conversion coatings of magnesium and its alloys	International Journal of Minerals, Metallurgy and Materials	Other	Saran, Debasis,Kumar, Atul,Bathula, Sivaiah,Sahu, Kisor K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
91	Das, P [et.al]	Corrosion, stress corrosion cracking and corrosion fatigue behavior of magnesium alloy bioimplants	Corrosion Reviews	Other	Das, P.,Sahu, KK., Gollapudi, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
92	Mandal, Animesh [et.al]	Microstructure-strength correlations in Al-Si-Cu alloys micro-alloyed with Zr	Materialia	Journals article	Mandal, Animesh		View Publication	School of Minerals, Metallurgical & Materials Engineering
93	Monikandan, VV [et.al]	Towards the Enhanced Mechanical and Tribological Properties and Microstructural Characteristics of Boron Carbide Particles Reinforced Aluminium Composites: A Short Overview	Johnson Matthey Technology Review	Journals article	Monikandan, VV		View Publication	School of Minerals, Metallurgical & Materials Engineering
94	Bathula, Sivaiah [et.al]	CoSb3 based thermoelectric elements pre-requisite for device fabrication	Solid State Sciences	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
95	Dash, M [et.al]	Engineering biomaterials to 3D-print scaffolds for bone regeneration: practical and theoretical consideration	Biomaterials Science	Journals article	Dash, M		View Publication	School of Minerals, Metallurgical & Materials Engineering
96	Bathula, Sivaiah [et.al]	In Situ Evolution of Secondary Metallic Phases in Off-Stoichiometric ZrNiSn for Enhanced Thermoelectric Performance	ACS Applied Materials and Interfaces	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
97	Swarnakar, Palash [et.al]	Phase engineered gallium ferrite: a promising narrow bandgap, room-temperature ferroelectric	Materials Advances	Journals article	Swarnakar, Palash		View Publication	School of Minerals, Metallurgical & Materials Engineering
98	Sabat R.K. [et.al]	An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys	Journal of Materials Engineering and Performance	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
99	Samantaray B.K. [et.al]	Hardness and Indentation Fracture Toughness in a Novel Silicon Composite Synthesized by Spark Plasma Sintering	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article	Samantaray B.K., Gollapudi S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
100	Dash, Madhusmita [et.al]	3D printing for functional tissue engineering	Tissue Engineering: Current Status and Challenges	Book Chapter	Dash, Madhusmita		View Publication	School of Minerals, Metallurgical & Materials Engineering
101	Sabat R.K. [et.al]	Evidence of Homogeneous Microstructures in Ti6Al4V Alloy During Shear Deformation	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
102	Sabat, Rama Krushna [et.al]	Constitutive and Artificial Neural Network Modeling to Predict Hot Deformation Behavior of CoFeMnNiTi Eutectic High-Entropy Alloy	Journal of Materials Engineering and Performance	Journals article	Sabat, Rama Krushna		View Publication	School of Minerals, Metallurgical & Materials Engineering
103	Mandal A. [et.al]	A nano-indentation study of hot consolidated steel matrix composite	Materials Today: Proceedings	Journals article	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
104	Sabat R.K.[et.al]	Cold Drawing of Commercially Pure Titanium and Its Effect on Microstructure and Texture Evolution	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
105	Sabat R.K.[et.al]	Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg–3Al–0.2Ce alloy	Philosophical Magazine	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
106	Anand A. [et.al]	Silicate minerals - Potential source of potash - A review	Minerals Engineering	Other	Anand A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
107	Bathula S. [et. al]	Role of sintering temperature on electronic and mechanical properties of thermoelectric material: A theoretical and experimental study of TiCoSb half-Heusler alloy	Materials Chemistry and Physics	Journals article	Bathula S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
108	Bathula S. [et. al]	Studies on contact angle measurements in superoleophobic aluminum hydroxide nanoflakes	Materials Letters	Journals article	Bathula S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
109	Dora T.R.K. [et. al]	Investigations into sample geometry effects on the superelastic and fatigue behavior of Nitinol: Modeling and experiments	Materialia	Journals article	Dora T.R.K. , Goud R.Jha R.,De P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
110	Padhee S.P.,Roy A.,Pati S.	Role of Mn-substitution towards the enhanced hydrogen storage performance in FeTi	International Journal of Hydrogen Energy	Journals article	Padhee S.P.,Roy A.,Pati S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
111	Dhindaw, BK [et. al]	Connecting short-range order for the liquid-solid transition of Al-Cu-Fe alloys	Materials Today Communications	Journals article	Dhindaw, BK		View Publication	School of Minerals, Metallurgical & Materials Engineering
112	De, PS [et. al]	Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution	Materials Chemistry And Physics	Journals article	De, PS		View Publication	School of Minerals, Metallurgical & Materials Engineering
113	Sahoo, S., Jha, BB., Mandal, A	Powder metallurgy processed TiB2-reinforced steel matrix composites: a review	Materials Science And Technology	Other	Mandal, A		View Publication	School of Minerals, Metallurgical & Materials Engineering
114	Mandal, A [et. al]	Investigation on Tribological Behavior of Hot-Pressed Steel/TiB2 Composites Using Taguchi Experimental Design	Journal Of Materials Engineering And Performance	Journals article	Mandal, A		View Publication	School of Minerals, Metallurgical & Materials Engineering
115	Sabat, RK [et. al]	Design and deformation characteristics of single-phase Co-Cr-Fe-Ni-V high entropy alloy	Journal Of Alloys And Compounds	Journals article	Sabat, RK		View Publication	School of Minerals, Metallurgical & Materials Engineering
116	Dhindaw, BK[et. al]	The Influence of Hydroxyapatite and Alumina Particles on the Mechanical Properties and Corrosion Behavior of Mg-Zn Hybrid Composites for Implants	Materials	Journals article	Dhindaw, BK		View Publication	School of Minerals, Metallurgical & Materials Engineering
117	Bathula, S [et. al]	Synergistic Optimization of Electronic and Thermal Transport Properties for Achieving High ZT in Ni and Te Co-substituted CoSb3	ACS Applied Energy Materials	Journals article	Bathula, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
118	Mandal, A [et. al]	On Investigating the Microstructural Evolution of Hot-Pressed TiB2-Reinforced Steel Composites	Transactions of The Indian Institute of Metals	Journals article	Mandal, A		View Publication	School of Minerals, Metallurgical & Materials Engineering
119	Johari, KK., Bathula, S., Gahtori, B	The Role of Magnetic Interaction on the Thermoelectric Performance of ZrNiSn Half-Heusler Alloys	Physica Status Solidi A-Applications And Materials Science	Journals article	Bathula, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
120	Rai, N., Das, P., Gollapudi, S	Can an amorphous alloy crystallize into a high entropy alloy?	Modelling and Simulation in Materials Science and Engineering	Journals article	Gollapudi, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
121	Nayak, D.[et al.]	An Optimal Route for the Preparation of Metallized Composite Pellets from Ilmenite Concentrate	JOURNAL OF SUSTAINABLE METALLURGY	Journals article	Nayak, D., Pati, S., De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
122	Padhee, S.P.[et al.]	Electro-deoxidation Process for Producing FeTi from Low-Grade Ilmenite: Tailoring Precursor Composition for Hydrogen Storage	JOURNAL OF SUSTAINABLE METALLURGY	Journals article	Padhee, S.P., Chanda, U.K., Roy, A., Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
123	Gowravaram, S.L.A., Mandal, A., Dhindaw, B.K.	Processing and characterization of vertical twin roll cast aluminium alloy sheets of A356, A6061 and A6005	Materials Today: Proceedings (2nd International Conference on Materials, Manufacturing and Machining for Industry 4.0, ICMMM 2020, Virtual, Online, 9 October 2020 - 10 October 2020)	Conference Proceeding	Gowravaram, S.L.A., Mandal, A., Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
124	Sabat R.K.[et al.]	Mechanism of microstructure and texture evolution during shear loading of AA6063 alloys	Journal of Alloys and Compounds	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
125	Kishore, R., B. Sahoo., Swain, D., Sahu, Kisor K.	Analysis of COVID19 Outbreak in India using SEIR model	Physics and Society Archive	Journals article	Kishore, Sahu, Kisor K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
126	Sabat R.K.[et al.]	Evaluation of structural and mechanical properties of high strength aluminum alloy components fabricated using laser powder bed fusion process	Journal of Laser Applications	Journals article	Sabat R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
127	Bathula S.[et al.]	A synergistic approach to achieving the high thermoelectric performance of La-doped SnTe using resonance state and partial band convergence	Materials Advances	Journals article	Bathula S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
128	Chanda U.K.[et al.]	Corrosion performance of graphene oxide coated 304 SS in PEMFC environment	SN Applied Sciences	Journals article	Chanda U.K., Pati S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
129	Datta T.[et al.]	Fractal behavior of surface oxide crack patterns on AISI 4140 high-strength low-alloy steel exposed to the simulated offshore environment	Applied Surface Science Advances	Journals article	Datta, T., Pathak, A.D., Basak, S., Gollapudi, S., Sahu, K.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
130	Bathula, S.[et al.]	High Thermoelectric Performance in n-Type Degenerate ZrNiSn-Based Half-Heusler Alloys Driven by Enhanced Weighted Mobility and Lattice Anharmonicity	ACS APPLIED ENERGY MATERIALS	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
131	Sabat, R. K.[et al.]	Effect of shear deformation on microstructure and texture evolution in commercially pure titanium	PHILOSOPHICAL MAGAZINE	Journals article	Sabat, R. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
132	Sharma, R., Roy, A., De, P.S.	Equimolar AlCuFeMn: A novel oxidation resistant alloy	Intermetallics	Journals article	Sharma, R., Roy, A., De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
133	Krishna, B. [et al.]	Quasi-static and dynamic nanomechanical characterization of PMMA/ZnO nanocomposite thick films synthesized by ultrasonication and spin-coating	POLYMERS & POLYMER COMPOSITES	Journals article	Krishna, B. and Das, K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
134	Swarnakar P., Besra L.D., Chatterjee S., Mukherjee S., Roy A.	Designing novel multiferroic perovskite oxide for prospective photovoltaic applications	Materials Science Forum	Conference Proceeding	Roy A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
135	Dhindaw B., Singh S., Mandal A., Pandey A.	Modelling and experimental characterization of processing parameters in vertical twin roll casting of aluminium alloy A356	Archives of Foundry Engineering	Journals article	Dhindaw B., Singh S., Mandal A., Pandey A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
136	Gollapudi S.[et al.]	Correlating corrosion inhibition to grain size in electrodeposited Ni-18Co	Emergent Materials	Journals article	Gollapudi S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
137	Das, P. [et al.]	Combined Effect of Sodium Lauryl Sulphate and Saccharin on Microstructure and Corrosion Performance of Electrodeposited Nickel Prepared from Modified Watts Bath	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article	Das, P., Samantaray, B. and Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
138	Gollapudi, S. [et al.]	Crystallographic texture influences on the thermal stability of nanocrystalline materials	Journal of Materials Science	Journals article	Gollapudi, S., Rai, N., Kushwaha, R. and Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
139	Mishra, N. and Das, K.	A Mori–Tanaka Based Micromechanical Model for Predicting the Effective Electroelastic Properties of Orthotropic Piezoelectric Composites with Spherical Inclusions	SN Applied Sciences	Journals article	Mishra, N. and Das, K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
140	Majhi, J., Mandal, A. [et al.]	Effect of pouring temperature on microstructure and mechanical properties in Al-16Si-2%Al2O3 hypereutectic alloys	Materials Today: Proceedings	Conference Proceeding	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
141	Kumar, S.D., Mandal, A. [et al.]	Optimization of dry sliding wear parameters of thixoformed A356-5TiB2 in-situ composites using RSM	Materials Today: Proceedings	Conference Proceeding	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
142	Dash, T., Satpathy, B.K. [et al.]	Synthesis of α-Al2O3–graphene composite: a novel product to provide multi-functionalities on steel strip surface	SN Applied Sciences	Journals article	Satpathy, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
143	Acharya, T. [et al.]	Effect of calendering on rate performance of Li4Ti5O12 anodes for lithium-ion batteries	Journal of Electroceramics	Journals article	Acharya, T., Chaupatnaik, A., Pathak, A., Roy, A. and Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
144	Parida, D.R. [et al.]	Effect of Using a Copper Insert on Stability and Energy Balance in an Aluminum Production Cell	Transactions of the Indian Institute of Metals	Journals article	Parida, D.R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
145	Nayak, D. [et al.]	Induration aspects of low-grade ilmenite pellets: Optimization of oxidation parameters and characterization for direct reduction application	Powder Technology	Journals article	Nayak, D., Pati, S., and De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
146	Kumar, A. and Roy, A.	Synthesis of PMN-PT/PDMS piezoelectric composite for energy harvesting	Materials Science Forum	Conference Proceeding	Kumar, A. and Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
147	Gollapudi, S. and Soni, A.K.	Understanding the effect of grain size distribution on the stability of nanocrystalline materials: An analytical approach	Materialia	Journals article	Gollapudi, S. and Soni, A.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
148	Mishra, N., Shah, C. and Das, K.	Predicting effective electromechanical properties of Pb-free polymer composite using finite element method	Materials Science Forum	Conference Proceeding	Mishra, N., Shah, C. and Das, K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
149	Kishore, R. [et al.]	Performance traits of a newly proposed modularity function for spatial networks: Better assessment of clustering for unsupervised learning	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Kishore, R., Swayamjyoti, S. and Sahu, K.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
150	Pandey, A. [et al.]	Multiscale modeling of chemical vapor infiltration process for manufacturing of carbon-carbon composite	Materials Today: Proceedings	Conference Proceeding	Pandey, A., Dhindaw, B.K. and Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
151	Mandal, P. [et al.]	Investigation of the effects of electrophoretic deposition parameters on 304SS steel coated with graphene oxide for PEMFC application	Materials Today: Proceedings	Conference Proceeding	Roy, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
152	Parida, H. [et al.]	Flame analysis for prediction of thermocouple temperature and quality of sponge iron at TATA steel long products limited	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Parida, H. and Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
153	Meher, S. [et al.]	Dynamic quality prediction and control in rotary sponge iron kilns	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Choudhary, P., Vempati, V.S., Deo, B. and Chattopadhyay, P.		View Publication	School of Minerals, Metallurgical & Materials Engineering
154	Jain, R. [et al.]	Development of ultrahigh strength novel Co–Cr–Fe–Ni–Zr quasi-peritectic high entropy alloy by an integrated approach using experiment and simulation	Materialia	Journals article	Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
155	Swarnakar, P. [et al.]	Designing novel multiferroic perovskite oxide for prospective photovoltaic applications	Materials Science Forum	Conference Proceeding	Swarnakar, P. and Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
156	Dsouza, S.M. [et al.]	A non-intrusive stochastic isogeometric analysis of functionally graded plates with material uncertainty	Axioms	Journals article	Varghese, T.M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
157	Mukherjee, Indrani [et al.]	A facile approach for the synthesis of copper(II) myristate strips and their electrochemical activity towards the oxygen reduction reaction	RSC ADVANCES	Journals article	Ratha, Satyajit		View Publication	School of Minerals, Metallurgical & Materials Engineering
158	Renk, O. [et al.]	The role of crystallographic texture on mechanically induced grain boundary migration	ACTA MATERIALIA	Journals article	Sabat, R. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
159	Vishwakarma, A. [et al.]	Melt-Spun SiGe Nano-Alloys: Microstructural Engineering Towards High Thermoelectric Efficiency	JOURNAL OF ELECTRONIC MATERIALS	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
160	Pemmada, R. [et al.]	Science-Based Strategies of Antiviral Coatings with Viricidal Properties for the COVID-19 Like Pandemics	MATERIALS	Journals article	Dash, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
161	Gupta, P. [et al.]	Structural, dielectric, impedance, and modulus spectroscopy of La3TiVO9 ceramic	PHYSICS LETTERS A	Journals article	Acharya, T.		View Publication	School of Minerals, Metallurgical & Materials Engineering
162	Gupta, P. [et at.]	Structural and electrical properties of Bi2YSnVO9 ceramic	CERAMICS INTERNATIONAL	Journals article	Acharya, T.		View Publication	School of Minerals, Metallurgical & Materials Engineering
163	Pathak, A. D. [et al.]	Mechanistic insight into the performance enhancement of Si anode of a lithium-ion battery with a fluoroethylene carbonate electrolyte additive	JOURNAL OF APPLIED ELECTROCHEMISTRY	Journals article	Pathak, A. D., Samanta, K., Sahu, K. K. and Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
164	Vishwakarma, A. [et al.]	Compositional modulation is driven by aliovalent doping in n-type TiCoSb based half-Heuslers for tuning thermoelectric transport	INTERMETALLICS	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
165	Chatterjee, K. [et al.]	New Thiourea-Based Ionic Liquid as an Electrolyte Additive to Improve Cell Safety and Enhance Electrochemical Performance in Lithium-Ion Batteries	ACS OMEGA	Journals article	Chatterjee, K., Pathak, A. D., Sahu, K. K. and Singh, A. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
166	Chanda, U. K. [et al.]	Electrodeposited Ni-Mo-Cr-P coatings for AISI 1020 steel bipolar plates	INTERNATIONAL JOURNAL OF HYDROGEN ENERGY	Journals article	Chanda, Uttam K.; Padhee, Satya Prakash; Pandey, Ashwani K.; Roy, Sudesna; Pati, Soobhankar		View Publication	School of Minerals, Metallurgical & Materials Engineering
167	Kumar, G. V. S. [et al.]	Excellent Combination of Tensile ductility and strength due to nanotwinning and a biamodal structure in cryorolled austenitic stainless steel	SCIENTIFIC REPORTS	Journals article	Mangipudi, K. R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
168	Kumar, A. S. D. [et al.]	Phase Field Modelling of Precipitate Coarsening in Binary Alloys with Respect to Atomic Mobility of Solute in the Precipitate Phase	TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS	Journals article	Bhaskar, M. S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
169	Yang, X. L. [et al.]	Influence of reinforcing particle distribution on the casting characteristics of Al-SiCp composites	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY	Journals article	Dhindaw, B. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
170	Chatterjee, K. [et al.]	Synthesis, characterization and application of a non-flammable dicationic ionic liquid in lithium-ion battery as electrolyte additive	SCIENTIFIC REPORTS	Journals article	Chatterjee, K., Pathak, A. D., Lakma, A. and Sahu, K. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
171	Chauhan, N. S. [et al.]	Defect Engineering for Enhancement of Thermoelectric Performance of (Zr, Hf)NiSn-Based n-type Half-Heusler Alloys	JOURNAL OF PHYSICAL CHEMISTRY C	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
172	Murugan, N. [et al.]	Thermoplastic elastomer blend based on EMA and NBR; optimization of process parameters	JOURNAL OF APPLIED POLYMER SCIENCE	Journals article	Nando, G. B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
173	Shukla, A.K., Deo, B. and Robertson, D.G.C.	Modeling of scrap dissolution in molten iron for the case of heat transfer-controlled process by different approaches and comparison of their accuracies	Journal of Heat Transfer	Journals article	Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
174	Rai, N. [et al.]	Theoretical and experimental studies on thermal stability of nanocrystalline Mg–Mo alloy	Materialia	Journals article	Rai, N., Samantaray, B.K. and Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
175	Padhee, S.P., Roy, A. and Pati, S.	Mechanistic insights into efficient reversible hydrogen storage in ferrotitanium	International Journal of Hydrogen Energy	Journals article	Padhee, S.P., Roy, A. and Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
176	Das,Priyabrata, Bathula,Sivaiah and Gollapudi, Srikant	Evaluating the effect of grain size distribution on thermal conductivity of thermoelectric materials	Nano Express	Journals article	Das,Priyabrata, Bathula,Sivaiah and Gollapudi, Srikant		View Publication	School of Minerals, Metallurgical & Materials Engineering
177	Singh, Ranjeet Kumar [et al.]	Experimental investigation on the separation capabilities and limitation of Falcon semi-batch concentrator	Separation Science And Technology	Journals article	Singh, Ranjeet Kumar and Sahu, Kisor Kumar		View Publication	School of Minerals, Metallurgical & Materials Engineering
178	Acharya, Truptimayee and Choudhary, R. N. P.	Strengthening of multiferroicity in nickel titanate by modifying with bismuth and lead titanate	Materials Chemistry And Physics	Journals article	Acharya, Truptimayee		View Publication	School of Minerals, Metallurgical & Materials Engineering
179	Samantray, J. [et al.]	Sustainable Process for the Extraction of Potassium from Feldspar Using Eggshell Powder	ACS Omega	Journals article	Anand, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
180	Deepak Kumar, S., Dewangan, S., Jha, S.K.and Mandal, A.	Tribo-performance of Thixoformed A356-5TiB2 in-situ Composites	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
181	Acharya, Truptimayee and Choudhary, R. N. P.	Studies of structural, dielectric, and electrical characteristics of 0.5(BiMn1/2Ti1/2O3)-0.5PbTiO(3) electronic system	Journal Of Materials Science-materials In Electronics	Journals article	Acharya, Truptimayee		View Publication	School of Minerals, Metallurgical & Materials Engineering
182	Das, Shreeja, Nayak, Saroj K. and Sahu, Kisor K.	Insight into anomalous hydrogen adsorption on rare earth metal decorated on 2-dimensional hexagonal boron nitride: a density functional theory study	Rsc Advances	Journals article	Das, Shreeja, Nayak, Saroj K. and Sahu, Kisor K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
183	Rani, Renu [et al.]	Sculpting Artificial Edges in Monolayer MoS2 for Controlled Formation of Surface-Enhanced Raman Hotspots	Acs Nano	Journals article	Das, Shreeja, Sahoo, Mihir Ranjan, Sahu, Kisor K. and Nayak, Saroj K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
184	Basak, S. [et al.]	Surface modifcation of structural material for nuclear applications by electron beam melting: enhancement of microstructural and corrosion properties of Inconel 617	SN Applied Sciences	Journals article	Sahu, K.K and Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
185	Maurya, M.R.[et al.]	Optimization of electroless plating of gold during MACE for through etching of silicon wafer	Materials Science in Semiconductor Processing	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
186	Kaur, S. [et al.]	Synthesis optimization, photoluminescence and thermoluminescence studies of Eu3+ doped calcium aluminozincate phosphor	Journal of Alloys and Compounds	Journals article	Sivaiah, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
187	Panda, R., Gupta, R.K., Mandal, A., Chakravarthy, P.,	Hot Deformation Behavior of AA2024 with and without In Situ Titanium Diboride Dispersoids	Materials Performance and Characterization	Journals article	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
188	Anand, Amit	Synthesis of Rare Earth Compounds from Phosphor Coating of Spent Fluorescent Lamps	Separation And Purification Reviews	Journals article	Anand, Amit		View Publication	School of Minerals, Metallurgical & Materials Engineering
189	Bhardwaj, Ruchi [et al.]	Optimization of electrical and thermal transport properties of Fe0.25Co0.75Sb3 Skutterudite employing the isoelectronic Bi-doping	Intermetallics	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
190	Basak, Soumyabrata [et al.]	Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion Resistance	Metals And Materials International	Journals article	Sahu, Kisor K. and Gollapudi, Srikant		View Publication	School of Minerals, Metallurgical & Materials Engineering
191	Anand, A. [et al.]	Leaching of Rare Earth Elements from the Residue Generated by the Lixiviation of Waste Phosphor with Sulphuric Acid	Transactions of the Indian Institute of Metals	Journals article	Anand, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
192	Deepak Kumar, S., Ghose, J., Mandal, A.	Thixoforming of light-weight alloys and composites: An approach toward sustainable manufacturing	Sustainable Engineering Products and Manufacturing Technologies	Book Chapter	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
193	Varshney, P. [et al.]	Effect of grain boundary relaxation on the corrosion behaviour of nanocrystalline Ni-P alloy	Journal of Alloys and Compounds	Journals article	Varshney, P., Pati, S. & Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
194	Singh, Ranjeet [et al.]	Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator	MINING METALLURGY & EXPLORATION	Journals article	Singh, Ranjeet, Kishore, Raj and Sahu, Kisor		View Publication	School of Minerals, Metallurgical & Materials Engineering
195	Sabat, R.K., Muhammad, W., Mishra, R.K., Inal, K.	Effect of microstructure on fracture in age hardenable Al alloys	Philosophical Magazine	Journals article	Sabat, R. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
196	Acharya, M., Mondol, S., Mandal, A.	Development of high strength suction cast hypereutectic Al–20Si alloy containing gamma alumina and strontium	Materials Science and Technology (United Kingdom)	Journals article	Acharya, M., & Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
197	Vinjamuri, R. [et al.]	Microstructure, texture, mean free path of dislocations and mechanical properties of Ti–6Al–4V alloy during uniaxial compression at elevated temperatures	Materials Science and Engineering A	Journals article	Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
198	Upadhyay, N. K. [et al.]	Facile bulk synthesis of high performance β-Zn4Sb3 for thermoelectric applications	Materials Letters	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
199	Anas, N.M. [et al.]	Microstructure, mechanical and corrosion properties of cryorolled-AA5052 at various solution treatment temperatures	Materials Research Express	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
200	Debta, M.K. [et al.]	Microstructure and texture evolution during annealing of Ti–6Al–4V alloy	Materials Science and Technology (United Kingdom)	Journals article	Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
201	Acharya, T., Choudhary, R.N.P.	Structural, electrical and magneto-electric properties of chemically synthesized Bi/PbTiO3-modified cobalt titanate	Physica B: Condensed Matter	Journals article	Acharya, T.		View Publication	School of Minerals, Metallurgical & Materials Engineering
202	Johari, K.K. [et al.]	Band Structure Modification and Mass Fluctuation Effects of Isoelectronic Germanium-Doping on Thermoelectric Properties of ZrNiSn	ACS Applied Energy Materials	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
203	Maurya, Muni Raj [et al.]	Wide spectral photoresponse of template assisted out of plane grown ZnO/NiO composite nanowire photodetector	Nanotechnology	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
204	Chauhan, Nagendra S.[etal.]	Compositional Tailoring for Realizing High Thermoelectric Performance in Hafnium-Free n-Type ZrNiSn Half-Heusler Alloys	ACS Applied Materials & Interfaces	Journals article	Bathula, Sivaiah		View Publication	School of Minerals, Metallurgical & Materials Engineering
205	Abu Seman, Anasyida [et al.]	Corrosion behavior of heat-treated and cryorolled Al 5052 alloys in different chloride ion concentrations	ANTI-CORROSION METHODS AND MATERIALS	Journals article	Brij, Dhindaw		View Publication	School of Minerals, Metallurgical & Materials Engineering
206	Rodzi, Siti Nur Hazwani Mohamad; Zuhailawati, Hussain; Dhindaw, B. K.	Mechanical and degradation behaviour of biodegradable magnesium-zinc/hydroxyapatite composite with different powder mixing techniques	JOURNAL OF MAGNESIUM AND ALLOYS	Journals article	Dhindaw, B. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
207	Patibanda, S. [ et al.]	On the Hardness and Strain Rate Sensitivity of Electrodeposited Nanocrystalline Ni–18 wt% Co Alloy Studied by Nanoindentation	Transactions of the Indian Institute of Metals	Journals article	Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
208	Acharya, Mihira and Mandal, Animesh	Effect of Semi-Solid Heat Treatment on the Microstructure and Dry Sliding Wear Behavior of Al-20Si Alloy at Optimized Parametric Conditions	Metals and Materials International	Journals article	Acharya, Mihira and Mandal, Animesh		View Publication	School of Minerals, Metallurgical & Materials Engineering
209	Chowdhury, U. [et.al.]	Origin of ferroelectricity in orthorhombic LuFeO3	Physical Review B	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
210	Panda, R., Gupta, R.K., Mandal, A., Chakravarthy, P.	Materials performance and characterization	Materials Performance and Characterization	Journals article	Chakravarthy, P.		View Publication	School of Minerals, Metallurgical & Materials Engineering
211	Pathak, S.[et.al.]	Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy	Journal of Materials Engineering and Performance	Journals article	Pathak, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
212	Parida, K. [et al.]	Relaxor behavior and impedance spectroscopic studies of chemically synthesized SrCu3Ti4O12 ceramic	Materials Research Bulletin	Journals article	Das, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
213	Borah, S. [et al.]	Quality prediction and control in coal-fired rotary kilns at Tata Sponge Iron Ltd	AISTech - Iron and Steel Technology Conference Proceedings	Conference Proceeding	Borah, S., Mondal, S., Choudhary, P. & Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
214	Deo, B., Sahoo, K.K. & Kumar, S.	Production of ultralow-phosphorus steels in the BOF: Meeting the technical and operational challenges	AISTech - Iron and Steel Technology Conference Proceedings	Conference Proceeding	Deo, B., Sahoo, K.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
215	Mondal, S. [et al.]	Operation of coal-based sponge iron rotary kiln to reduce accretion formation and optimize quality and power generation	AISTech - Iron and Steel Technology Conference Proceedings	Conference Proceeding	Mondal, S., Choudhary, P., Borah, S. & Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
216	Abioye, T.E. [et al.]	Investigation of the microstructure, mechanical and wear properties of AA6061-T6 friction stir weldments with different particulate reinforcements addition	Journal of Materials Research and Technology	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
217	Kishore, R., Gogineni, A.K., Nussinov, Z. & Sahu, K.K.	A nature inspired modularity function for unsupervised learning involving spatially embedded networks	Scientific Reports	Journals article	Kishore, R. & Gogineni, A.K		View Publication	School of Minerals, Metallurgical & Materials Engineering
218	Deepak Kumar, S., Jha, S.K., Karthik, D., Mandal, A.	Fatigue analysis of A356-TiB2 (5wt%) in-situ nano composites	Materials Today: Proceedings	Conference Proceeding	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
219	Chanda, U.K. [et al.]	Effect of Cr content on the corrosion resistance of Ni–Cr–P coatings for PEMFC metallic bipolar plates	Materials for Renewable and Sustainable Energy	Journals article	Chanda, U.K., Padhee, S.P., Pathak, A.D. & Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
220	Chauhan, N.S. [et al.]	Spinodal decomposition in (Ti, Zr)CoSb half-Heusler: A nanostructuring route toward high efficiency thermoelectric materials	Journal of Applied Physics	Journals article	Bathula, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
221	Chauhan, N.S. [et al.]	Enhanced Thermoelectric Performance in Hf-Free p-Type (Ti, Zr)CoSb Half-Heusler Alloys	Journal of Electronic Materials	Journals article	Bathula, S		View Publication	School of Minerals, Metallurgical & Materials Engineering
222	Acharya, M. & Mandal, A.	Individual and synergistic effect of gamma alumina (γ-Al2O3) and strontium on microstructure and mechanical properties of Al-20Si alloy	Transactions of Nonferrous Metals Society of China (English Edition)	Journals article	Acharya, M. & Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
223	Sharma, R. [et al.]	Effect of friction stir processing on corrosion of Al-TiB2 based composite in 3.5 wt.% sodium chloride solution	Transactions of Nonferrous Metals Society of China (English Edition)	Journals article	Sharma, R. & De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
224	Swain, I.P., Pati, S. & Behera, S.K.	A preceramic polymer derived nanoporous carbon hybrid for supercapacitors	Chemical Communications	Journals article	Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
225	MingRui, L. [et al.]	Electroplating of Through Silicon Vias: A Kinetic Monte Carlo Model	Electron Devices Technology and Manufacturing Conference	Conference Proceeding	Mangipudi, K.R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
226	Pathak, A.D. [et al.]	Selective leaching of Al from hypereutectic Al-Si alloy to produce nano-porous silicon (NPS) anodes for lithium ion batteries	Electrochimica Acta	Journals article	Pathak, A.D., Chanda, U.K., Samanta, K., Mandal, A., Sahu, K.K. & Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
227	Samantray, J. [et al.]	Production of Potassium Chloride from K-Feldspar Through Roast–Leach–Solvent Extraction Route	Transactions of the Indian Institute of Metals	Journals article	Anand, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
228	Kishore, R. [et al.]	Abstraction of meso-scale network architecture in granular ensembles using “big data analyticsâ€Â_x009d_ tools	Journal of Physics Communications	Journals article	Kishore, R., Krishnan R. & Satpathy, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
229	Dhindaw, B.K., Aditya, Gowrawaram S.L. & Mandal, A.	Recycling and Downstream Processing of Aluminium Alloys for Automotive Applications	Encyclopedia of Renewable and Sustainable Materials	Book Chapter	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
230	Aditya, A. [et al.]	Optimization study of sodium hydroxide consumption in the coal demineralization process	Mineral Processing and Extractive Metallurgy Review	Journals article	Suresh, A., Sriramoju, S.K. & Dash, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
231	Chanda, U.K. [et al.]	Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell	International Journal of Hydrogen Energy	Journals article	Chanda, U.K. & Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
232	Deepak Kumar, S. [et al.]	Deformation behavior of semi-solid forged A356–5TiB 2 nano-in situ composites	Lecture Notes in Mechanical Engineering.	Book Chapter	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
233	Samantray, J. [et al.]	Nepheline Syeniteâ€â€_x009d_An Alternative Source for Potassium and Aluminium	Symposium on Rare Metal Technology	Conference Proceeding	Anand, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
234	Gollapudi, S.	Strength Variability in Silicon-Disilicide Eutectic Alloys.	Transactions of the Indian Institute of Metals	Journals article	Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
235	Webb, J., Gollapudi, S., Charit, I.	An overview of creep in tungsten and its alloys	International Journal of Refractory Metals and Hard Materials	Journals article	Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
236	Biswal, A. K., Das, S., & Roy, A.	Designing and synthesis of a polymer matrix piezoelectric composite for energy harvesting.	IOP Conference Series: Materials Science and Engineering.	Conference Proceeding	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
237	Mishra, S., Chaubey, A., & Mandal, A	Effect of Heat Treatment on the Microstructure of Mg-4Al-Nd Alloys.	Technologies.	Journals article	Mishra, S. & Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
238	Mangipudi, K. R., Epler, E. and Volkert, C. A.	Morphological similarity and structure-dependent scaling laws of nanoporous gold from different synthesis methods.	Acta Materialia	Journals article	Mangipudi, K. R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
239	Vishal, G., Choudhary, P., Deo, B., Sahoo, S.K., Malakar, P., Pothal, G., Chattopadhyay, P.	Optimal control of accretion growth and quality of sponge iron in a coal-fired rotary kiln at Tata Sponge, India	AISTech - Iron and Steel Technology Conference Proceedings.	Conference Proceeding	Vishal, G., Choudhary, P., Deo, B.,		View Publication	School of Minerals, Metallurgical & Materials Engineering
240	Choudhary, P., Vishal, G., Deo, B., Pothal, G., Chattopadhyay, P., Sahoo, S.K., Malakar, P.	Prediction of accretion growth from dynamic analysis of heat transfer in coal fired sponge iron rotary kiln at Tata Sponge, Joda, India	AISTech - Iron and Steel Technology Conference Proceedings.	Conference Proceeding	Choudhary, P., Vishal, G., Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
241	Panda, D., Sabat, R.K., Suwas, S., Hiwarkar, V.D., Sahoo, S.K.	Texture weakening in pure magnesium during grain growth	Philosophical Magazine.	Journals article	Sabat, R.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
242	Acharya, T., Choudhary, R.N.P.	Inducing ferroelectricity and magneto-electric effect in the iron titanate ilmenite by modifying with bismuth and lead titanate.	Journal of Alloys and Compounds	Journals article	Acharya, T.		View Publication	School of Minerals, Metallurgical & Materials Engineering
243	Sahoo, S., Jha, B.B.,[et al.]	Mechanical and Wear Behaviour of Hot-Pressed 304 stainless Steel Matrix Composites Containing TiB 2 Particles	Transactions of the Indian Institute of Metals.	Journals article	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
244	Roy, A., Ghosh, M., Gourkar, H., De, P.S.	Microstructure, indentation and first principles study of AlCuFeMn alloy	Materialia	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
245	Prabhavale, O., Mahata, D., Nando, G.B.	Phosphorylated cardanol prepolymer-grafted carboxylated styrene–butadiene rubber for better processing with enhancing silica filler dispersion	Journal of Applied Polymer Science	Journals article	Nando, G.B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
246	Anand, A., Singh, R.[et al.]	Leaching of Rare Earth Metals from Phosphor Coating of Waste Fluorescent Lamps	Transactions of the Indian Institute of Metals	Journals article	Anand, A., Singh, R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
247	Mandal, P., Kumar Chanda, U., Roy, S.	A review of corrosion resistance method on stainless steel bipolar plate	Materials Today: Proceedings	Journals article	Mandal, P., Roy, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
248	Krishna, B., Chaturvedi, A., Mishra, N., Das, K.	Nanomechanical characterization of SU8/ZnO nanocomposite films for applications in energy-harvesting microsystems	Journal of Micromechanics and Microengineering	Journals article	Krishna, B., Mishra, N.		View Publication	School of Minerals, Metallurgical & Materials Engineering
249	Jha, S., Aditya, G.S.L., Mandal, A., Dhindaw, B.K.	Microstructural Changes in Hypoeutectic Al–Si Alloys by Low Shear and Vibration Induced Melt Conditioning Setup	Transactions of the Indian Institute of Metals	Journals article	Jha, S., Aditya, G.S.L., Mandal, A., Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
250	Anas, N.M., Dhindaw, B.K. [et al.]	Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperature	Journal of Materials Engineering and Performance 2018	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
251	Jha, S., Mandal, A., Srirangam, P.	Optimization of Casting Process Parameters for Synthesis of Al-Nb-B Master Alloy	JOM	Journals article	Jha, S., Mandal, A.,		View Publication	School of Minerals, Metallurgical & Materials Engineering
252	Anand, A., Singh, R., Ghosh, M.K., Sanjay, K.	Factorial design for process optimization and generation of kinetic data for yttrium and europium leaching	Mineral Processing and Extractive Metallurgy: Transactions of the Institute of Mining and Metallurgy	Journals article	Anand, A., Singh, R.,		View Publication	School of Minerals, Metallurgical & Materials Engineering
253	Mishra, M., Roy, A. [et al.]	Truncated hexagonal bi-pyramidal gallium ferrite nanocrystals: Integration of structural details with visible-light photo-activity and self-cleaning properties	Journal of Materials Chemistry A	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
254	Sahoo, S., Mandal, A. [et al.]	Impression creep behaviour of TiB2particles reinforced steel matrix composites	Materials Science and Technology (United Kingdom)	Journals article	Mandal, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
255	Sahoo, S., Das, S., Mahapatra, P.K., Choudhary, R.N.P.	Fabrication and characterization of LaFeO3-BaTiO3electroceramics	Materials Chemistry and Physics	Journals article	Das, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
256	Mishra, M., Roy, A., Dash, S., Mukherjee, S.	Flexible nano-GFO/PVDF piezoelectric-polymer nano-composite films for mechanical energy harvesting	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
257	Pattnayak, A. [et al.]	A Comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement	Materials Today: Proceedings	Conference Proceeding	Elsevier Ltd		View Publication	School of Minerals, Metallurgical & Materials Engineering
258	Pati, Soobhankar.	Energy Technology 2014: Carbon Dioxide Management and Other Technologies		Book	Soobhankar Pati		View Publication	School of Minerals, Metallurgical & Materials Engineering
259	Mishra, N., Das, K.	Predicting Elastic Properties of Unidirectional SU8/ZnO Nanocomposites using COMSOL Multiphysics	Proceedings of the 2016 COMSOL Conference	Conference Proceeding	Das, K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
260	Kishore, R. [et al.]	Kinetic instability, symmetry breaking and role of geometric constraints on the upper bounds of disorder in two dimensional packings	Scientific Reports	Journals article	Kishore, R., Das, S.,Sahu, K. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
261	Singh, R., Saran, D.	Thermochemical Hydrogen Generation. In Solar Fuel Generation		Book Chapter	Singh, R., Saran, D.		View Publication	School of Minerals, Metallurgical & Materials Engineering
262	Nussinov, Z. [et al.]	Inference of Hidden Structures in Complex Physical Systems by Multi-scale Clustering	Information Science for Materials Discovery and Design	Book Chapter	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
263	Sahoo, K.K. [et al.]	Nd and Ru co-doped bismuth titanate polycrystalline thin films with improved ferroelectric properties	Journal of Physics D: Applied Physics	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
264	Deo, B.	Wear and Dissolution of MgO–C Refractory Lining in Belly and Top Cone Regions of BOF Vessel	Transactions of the Indian Institute of Metals	Journals article	Deo, B.		View Publication	School of Minerals, Metallurgical & Materials Engineering
265	B. Dutta [et al.]	Liquid-liquid extraction studies of gadolinium with N-methyl-N,N,N-trioctyl ammonium-bis-(2-ethylhexyl) phosphonate – Task specific ionic liquid	Separation and Purification Technology	Journals article	K.K. Sahu, N.P.H. Padmanabhan		View Publication	School of Minerals, Metallurgical & Materials Engineering
266	Pandey, A.[ et al.]	Identification of phase in-homogeneities in Na-SrSiO3 electrolytes for low temperature SOFCs	Journal of Electroceramics	Journals article	Chanda, U.K., Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
267	Nellippallil, A.B. [et al.]	Hot Rolling of a Non-heat Treatable Aluminum Alloy: Thermo-Mechanical and Microstructure Evolution Model	Transactions of the Indian Institute of Metals	Journals article	De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
268	Das, S., Biswal, A.K., Roy, A.	Fabrication of flexible piezoelectric PMN-PT based composite films for energy harvesting	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Das, S., Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
269	Salleh, E.M. [et al.]	Enhanced Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn/HA Composite	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
270	Marshal, A., [et al.]	Combinatorial synthesis of high entropy alloys: Introduction of a novel, single phase, body-centered-cubic FeMnCoCrAl solid solution	Journal of Alloys and Compounds	Journals article	De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
271	Singh, R. [et al.]	An Approach for Estimation of Cathode Voltage Drop in an Aluminum Reduction Cell with an Inclined Carbon Block and a Copper Insert	Transactions of the Indian Institute of Metals	Journals article	Singh, R., Das, K.,		View Publication	School of Minerals, Metallurgical & Materials Engineering
272	Rai, R.N. [et al.]	Studies on synthesis of in-situ Al-TiC metal matrix composites	IOP Conference Series: Materials Science and Engineering	Conference Proceeding	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
273	Deepak Kumar, S., Mandal, A., Chakraborty, M.	Solid fraction evolution characteristics of semi-solid A356 alloy and in-situ A356-TiB2 composites investigated by differential thermal analysis	International Journal of Minerals, Metallurgy and Materials	Journals article	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
274	Roy, A., [et al.]	Optical anisotropy in bismuth titanate: An experimental and theoretical study	Journal of Applied Physics	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
275	Mandal, A., Kumar, S.D., Chakraborty, M.	Processing and properties of aluminium based composites reinforced with in-situ TiB2 particles	Materials Science and Technology Conference and Exhibition 2014, MS and T 2014	Conference Proceeding	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
276	Mantry, S., [et al.]	Tribo-performance of plasma-sprayed nanostructured yttria-stabilized zirconia coatings using Taguchi's experimental design	Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology	Journals article	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
277	Mishra, R.S., De, P.S., Kumar, N.	Friction stir welding and processing: Science and engineering		Book	De, P.S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
278	Mantry, S.[et al.]	Abrasive Wear Analysis of Plasma-Sprayed LaCeYSZ Nanocomposite Coatings Using Experimental Design and ANN	Tribology Transactions	Journals article	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
279	Pati, S. [at al.]	TMS Annual Meeting: Preface	TMS Annual Meeting	Other	Pati, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
280	Reddy, N.S.	Design of an ideal grain-refiner alloy for Al-7Si alloy using artificial neural networks	Journal of Materials Engineering and Performance	Journals article	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
281	Herbert, M.A. [et al.]	Tensile properties of cast and mushy state rolled Al–4·5Cu alloy and in situ Al4·5Cu–5TiB2 composite	International Journal of Cast Metals Research	Journals article	Chakraborty, M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
282	Siddhalingeshwar, I.G. [et al.]	Microstructural evolution and hardness of in situ Al-4.5Cu-5TiB2 composite processed by multiple roll passes in mushy state	Transactions of the Indian Institute of Metals	Conference Proceeding	Chakraborty , M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
283	Acharya, M., Deepak Kumar, S., Mandal, A.	Effect of Cooling Slope Angle on Microstructure of Al-7Si Alloy	Transactions of the Indian Institute of Metals	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
284	Mohamed, W.[et al.]	Formability of a wrought Mg alloy evaluated by impression testing	Materials Science and Engineering A	Journals article	Gollapudi, S.		View Publication	School of Minerals, Metallurgical & Materials Engineering
285	Mangipudi, K.R., Epler, E., Volkert, C.A.	On the multiaxial yielding and hardness to yield stress relation of nanoporous gold	Scripta Materialia	Journals article	Mangipudi, K.R.		View Publication	School of Minerals, Metallurgical & Materials Engineering
286	Das, S.[et al.]	Electrical and mechanical behavior of PMN-PT/CNT based polymer composite film for energy harvesting	Applied Surface Science	Journals article	Biswal, A.K, Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
287	Sahoo, S., Jha, B.B., Sahoo, T.K., Mandal, A.	Influence of reinforcement and processing on steel-based composites: Microstructure and mechanical response	Materials and Manufacturing Processes	Journals article	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
288	Sahoo, N.R., Mohapatra, P.K.J., Mahanty, B.	Examining the process of normalising the energy-efficiency targets for coal-based thermal power sector in India	Renewable and Sustainable Energy Reviews	Journals article	Mohapatra, P.K.J.		View Publication	School of Minerals, Metallurgical & Materials Engineering
289	Mishra, M.[et al.]	Room temperature multiferroism in polycrystalline thin films of gallium ferrite	Journal of Alloys and Compounds	Journals article	Roy, A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
290	Mathew, J.[et al.]	Effect of semi-solid forging on microstructure and mechanical properties of in-situ cast Al-Cu-TiB2 composites	Journal of Alloys and Compounds	Journals article	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
291	Basak,S. [et al.]	Studies on Electron Beam Surface Melting of AISI 316 Stainless Steel and AISI 347 Stainless Steel	Procedia Manufacturing	Journals article	Sahu, K.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
292	Baddour,C.E., Das,K., Vengallatore,S., Meunier,J.-L.	Production and characterization of a novel carbon nanotube/ titanium nitride nanocomposite	Materials Research Express	Journals article	Das,K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
293	Kumar,A. [et al.]	Structural Investigations of Nanocrystalline Cu-Cr-Mo Alloy Prepared by High-Energy Ball Milling	Journal of Electronic Materials	Journals article	Kumar, A, Mandal,A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
294	Kasimuthumaniyan,S., Singh,S.K., Jayasankar,K., Mohanta,K., Mandal,A.	An alternate approach to synthesize TiC powder through thermal plasma processing of titania rich slag	Ceramics International	Journals article	Mohanta,K., Mandal,A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
295	Dhindaw,B.K.,De,P.S., Jayashree,P.	Friction stir welding of aluminum alloy 1100 and titanium-al alloy	ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016	Conference Proceeding	Dhindaw,B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
296	Thuong, N.V. [et al.]	Dry wear behavior of cooling-slope-cast hypoeutectic aluminum alloy	International Journal of Materials Research	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
297	Sahoo, S.K., Das, M.K., Rath, P.	Numerical study of cyclic melting and solidification of nano enhanced phase change material based heat sink in thermal management of electronic components	ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016	Conference Proceeding	Sahoo, S.K., Das, M.K., Rath, P.		View Publication	School of Minerals, Metallurgical & Materials Engineering
298	Soon, L.L., Zuhailawati, H., Suhaina, I., Dhindaw, B.K.	Prediction of compressive strength of biodegradable Mg-Zn/HA composite via response surface methodology and its biodegradation	Acta Metallurgica Sinica (English Letters)	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
299	Mathew, J. [et al.]	X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB2 semi-solid forged composites	Materials Characterization	Journals article	Mandal A., Mathew, J.		View Publication	School of Minerals, Metallurgical & Materials Engineering
300	Sahu, K.K., Roy, A.K., Roy, A., Das, K., Singh, R.	Materials for Nuclear and Fossil Energy Applications	Advances in Materials Science and Engineering	Other			View Publication	School of Minerals, Metallurgical & Materials Engineering
301	Zuhailawati, H., Yusof, M.M., Anasyida, A.S., Almanar, I.P., Dhindaw, B.K.	The role of roller speed on solidification of Al-Mg-Si alloy during twin roll strip casting	Materials Science Forum	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
302	Hasniyati, M.R., Zuhailawati, H., Ramakrishnan, S., Dhindaw, B.K., Mohd Noor, S.N.F.	Design of experiment (DOE) study of hydroxyapatite-coated magnesium by cold spray deposition	Materials Science Forum	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
303	Rout, A.,[et al.]	Solvent extraction of plutonium(IV) in monoamide - Ammonium ionic liquid mixture	Separation and Purification Technology	Journals article	Chatterjee, K., Sahu, K. K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
304	Chowki, S., Rayaprol, S., Mukhopadhyay, A., Mohapatra, N.	Coexistence of spin glass type freezing and cooperative paramagnetic state in S r3MnTi O7	Physical Review B - Condensed Matter and Materials Physics	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
305	Mandal, A., Acharya, M.	Effect of Strontium and Misch Metal on Al–14Si–3Mg Alloy	Transactions of the Indian Institute of Metals	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
306	Singh, P., Roy, A., Garg, A., Prasad, R.	Effect of isovalent non-magnetic Fe-site doping on the electronic structure and spontaneous polarization of BiFeO3	Journal of Applied Physics	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
307	Chakraborty, M., Mandal, A., Kumar, G. V., Ravi, K. R., Siddhalingeswar, I. G., Mitra, R. & Murty, B. S.	Recent developments in aluminium alloy reinforced titanium diboride in situ composites	Indian Foundry Journal	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
308	Arora, H. S., Singh, H. & Dhindaw, B. K.	Corrosion Behavior of a Mg Alloy AE42 Subjected to Friction Stir Processing	Corrosion Science	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
309	Kumar, A., Jayasankar, K., Debata, M., Mandal, A.	Mechanical alloying and properties of immiscible Cu-20 wt.% Mo alloy	Journal of Alloys and Compounds	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
310	Chakraborty M	From "grain refiners" to "aluminium based in-situ composites" in ternary Al-Ti-B system	Materials Science and Technology Conference and Exhibition 2014, MS and T 2014	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
311	Mantry S. [et al.]	Microstructure and Thermal Characterization of Plasma-Sprayed Nanostructured La2Ce2O7-Doped YSZ Coatings	Journal of Thermal Spray Technology	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
312	Zuhailawati H. , Halmy M.N., Almanar I.P., Dhindaw B.K	Friction stir processed of 6061-t6 aluminum alloy reinforced with silica from rice husk ash	Advanced Materials Research: 3rd International Conference on the Advancement of Materials and Nanotechnology, ICAMN 3 2013; Penang; Malaysia; 19 November 2013 through 21 November 2013; Code 107494	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
313	Hussain Z, Nasir, L.M.M. , Anasyida, A.S. , Dhindaw, B.K.	Solidification of aluminum copper alloy during twin roll strip casting	Advanced Materials Research : 3rd International Conference on the Advancement of Materials and Nanotechnology, ICAMN 3 2013; Penang; Malaysia; 19 November 2013 through 21 November 2013; Code 107494	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
314	Herbert M.A., Das G., Maiti R., Chakraborty M., Mitra R.	Tensile properties of cast and mushy state rolled Al-45Cu alloy and in situ Al45Cu-5TiB2 composite	International Journal of Cast Metals Research	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
315	Siddhalingeshwar I.G., Herbert M.A., Chakraborty M., Mitra R.	Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite	Materials Science and Engineering A	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
316	Majumdar P., Singh S.B., Chakraborty M.	The influence of heat treatment and role of boron on sliding wear behaviour of β-type Ti-35Nb-7.2Zr-5.7Ta alloy in dry condition and in simulated body fluids	Journal of the Mechanical Behavior of Biomedical Materials	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
317	Majumdar P., Singh S.B., Chatterjee U.K., Chakraborty M.	Corrosion behaviour of heat treated boron free and boron containing Ti-13Zr-13Nb (wt%) alloy in simulated body fluid	Journal of Materials Science: Materials in Medicine	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
318	Geetha Priyadarshini B., Aich S., Chakraborty M.	Structural and morphological investigations on DC-magnetron-sputtered nickel films deposited on Si (100)	Journal of Materials Science	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
319	Siddhalingeshwar I.G., Deepthi D., Chakraborty M., Mitra R.	Sliding wear behavior of in situ Al-4.5Cu-5TiB2 composite processed by single and multiple roll passes in mushy state	Wear	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
320	Geetha Priyadarshini B., Aich S., Chakraborty M.	Studies on Ni-Ti thin films deposited by bias assisted magnetron sputtering	TMS Annual Meeting	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
321	Majumdar P., Singh S.B., Chatterjee U.K., Chakraborty M.	Effect of heat treatment and boron addition on corrosion behavior of Ti-35Nb-7.2Zr-5.7Ta (wt%) ?-titanium alloy in simulated body fluid	Corrosion	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
322	Kumar G.S.V., Chakraborty M., Garcia-Moreno F., Banhart J.	Foamability of MgAl2O4 (spinel) - Reinforced aluminum alloy composites	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
323	Majumdar P., Singh S.B., Chakraborty M.	The role of heat treatment on microstructure and mechanical properties of Ti-13Zr-13Nb alloy for biomedical load bearing applications	Journal of the Mechanical Behavior of Biomedical Materials	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
324	Jayasankar K., Mandal A., Pany A., Mukherjee P.S.	Synthesis of Fe-TiC in-situ composites by plasma smelting of ilmenite	Materials and Manufacturing Processes	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
325	Mantry S., Mohapatra S., Mohapatra S., Singh S.K., Mandal A., Satapathy A.	Erosion behavior of glass-epoxy composites filled with SiC from bamboo leaf	International Polymer Processing	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
326	Dhindaw B.K., Kumar M., Kumar A.	Simulation of cooling of liquid metal in an inclined slope to predict the condition for semi solid forming and its experimental validation	Transactions of the Indian Institute of Metals	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
327	Arora H.S., Singh H., Dhindaw B.K., Grewal H.S.	Some investigations on friction stir processed zone of AZ91 alloy	Transactions of the Indian Institute of Metals	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
328	Ajith Kumar K.K., Viswanath A., Pillai U.T.S., Pai B.C., Chakraborty M.	Changes in solidification morphology of Mg-Si alloys by Ca additions	Transactions of the Indian Institute of Metals	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
329	Ajith Kumar K.K., Subramonia Pillai U.T., Chandrasekhara Pai B., Chakraborty M.	Tribological behavior of Mg- Mg 2Si in-situ composite	Materials Science Forum	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
330	Ajith Kumar K.K., Raghukanadan K., Subramonia Pillai U.T., Chandrasekhara Pai B., Chakraborty M.	Processing and microstructure of magnesium in-situ composite with titanium and boron based reinforcement	Materials Science Forum	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
331	Aich S., Geetha Priyadarshini B., Gupta M., Ghosh S., Chakraborty M.	Formation of crystalline and amorphous phases during deposition of Ni xTi 1-x, thin films on silicon substrates interpretation of experimental results using molecular dynamics simulations	TMS Annual Meeting	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
332	Majumdar P., Singh S.B., Dhara S., Chakraborty M.	Influence of in situ TiB reinforcements and role of heat treatment on mechanical properties and biocompatibility of ? Ti-alloys	Journal of the Mechanical Behavior of Biomedical Materials	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
333	Charilaou M., Sahu K.K., Gehring A.U., Loffler J.F.	Steep energy landscapes and adjustable magnetization states in a four-layer mean-field model with competing interactions	Physical Review B - Condensed Matter and Materials Physics	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
334	Ritwik R., Prasada Rao A.K., Dhindaw B.K.	Low-convection-cooling slope cast AlSi7Mg alloy: A rheological perspective	Journal of Materials Engineering and Performance	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
335	Arora H.S., Singh H., Dhindaw B.K.	Wear behaviour of a Mg alloy subjected to friction stir processing	Wear	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
336	Ajith Kumar K.K., Pillai U.T.S., Pai B.C., Chakraborty M.	Dry sliding wear behaviour of Mg-Si alloys	Wear	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
337	Ghosh C.	Study on important diffusion parameters of binary Ni3Sn 4 phase	Journal of Materials Science: Materials in Electronics	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
338	Rai R.N., Rao A.K.P., Dutta G.L., Chakraborty M.	Forming behaviour of Al-TiC in-situ composites	Materials Science Forum	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
339	Noorakma A.C.W., Zuhailawati H., Aishvarya V., Dhindaw B.K.	Hydroxyapatite-coated magnesium-based biodegradable alloy: Cold spray deposition and simulated body fluid studies	Journal of Materials Engineering and Performance	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
340	Ajith Kumar K.K., Pillai U.T.S., Pai B.C., Chakraborty M.	Microstructural evolution and mechanical properties of misch metal added Mg-Si alloys	Metals and Materials International	Journals article			View Publication	School of Minerals, Metallurgical & Materials Engineering
341	Ajith Kumar K.K., Viswanath A., Pillai U.T.S., Pai B.C., Chakraborty M.	Influence of neodymium addition on the microstructure, mechanical and thermal properties of Mg-Si alloys	Procedia Engineering	Conference Proceeding			View Publication	School of Minerals, Metallurgical & Materials Engineering
342	Mantry S., Mishra B.K., Chakraborty M.	Parametric appraisal of process parameters for adhesion of plasma sprayed nanostructured YSZ coatings using taguchi experimental design	The Scientific World Journal	Journals article	Chakraborty M.		View Publication	School of Minerals, Metallurgical & Materials Engineering
343	Arora H.S. [et al.]	Microstructure-property relationship for friction stir processed magnesium alloy	Advanced Engineering Materials	Journals article	Dhindaw, B.K.		View Publication	School of Minerals, Metallurgical & Materials Engineering
344	Mandal A., Chippa N., Jayasankar K., Mukherjee P.S.	Effect of high magnesium content on microstructure of Al-7Si alloy	Materials Letters	Journals article	Mandal A.		View Publication	School of Minerals, Metallurgical & Materials Engineering
345	Mantry S.[et al.]	Influence of in-flight particle state diagnostics on properties of plasma sprayed YSZ-CeO2 nanocomposite coatings	International Journal of Smart and Nano Materials	Journals article	Mandal A., Chakraborty M.		View Publication	School of Minerals, Metallurgical & Materials Engineering